PC · System requirements & FPS

Dead or Alive 6 Last Round: PC system requirements & FPS

Does Dead or Alive 6 Last Round run on your PC? Pick your card and compare it with the official minimum and recommended requirements.

  • Officialminimum and recommended requirements
  • 39,00 €cheapest of 2 deals

Will Dead or Alive 6 Last Round run on your PC?

Pick your graphics card and you get the verdict. We remember your card for the next game you check.

1080p1440p4K
LowMediumHighUltra

Dead or Alive 6 Last Round official PC requirements

What the studio publishes. The tags update with the card you picked above.

Minimum

  • OSWindows® 11
  • ProcessorIntel Core i5-8400 or higher, AMD Ryzen3 3100 or higher
  • Memory8 GB RAM
  • GraphicsGeForce GTX 1060 (VRAM 6GB) or higher, Radeon RX 590 (VRAM 8GB) or higher
  • DirectXVersion 12
  • NetworkBroadband Internet connection
  • Storage80 GB available space
  • Sound Card48000Hz 16bit Stereo
  • Additional NotesSSD required

Recommended

  • OSWindows® 11
  • ProcessorIntel Core i7-8700 or higher, AMD Ryzen5 3600XT or higher
  • Memory16 GB RAM
  • GraphicsGeForce GTX 1070 (VRAM 8GB) or higher, Radeon RX 5700 XT (VRAM 8GB) or higher
  • DirectXVersion 12
  • NetworkBroadband Internet connection
  • Storage80 GB available space
  • Sound Card48000Hz 16bit Stereo
  • Additional NotesSSD required

A pair like "RX 6700 XT / RTX 2080" means either of the two: the bar is set by the lower one.

Want to buy Dead or Alive 6 Last Round now?

If your setup runs it, this is the price: the best of 28 deals across 16 verified stores. Check all prices for Dead or Alive 6 Last Round on all platforms →

Check another game with the same card

The newest releases with measured FPS. Your card stays selected.

Onimusha Way of the SwordFPS measured NBA 2K27FPS measured The Blood of DawnwalkerFPS measured Mortal Shell IIFPS measured Assassins Creed Black Flag ResyncedFPS measured 007 First LightFPS measured Forza Horizon 6FPS measured Crimson DesertFPS measured

Upscaling in Dead or Alive 6 Last Round: DLSS, FSR and XeSS

They render the game at a lower resolution and rebuild the image. It is the single biggest gain there is, and the only one that does not force you to lower graphics quality.

DLSSNVIDIA RTX only+25 to +35%

In Quality mode. The best-looking of the three. At 4K the gain is bigger; at 1080p, smaller and with more loss of sharpness.

FSRAny card, NVIDIA and Intel included+20 to +30%

The universal option. A step behind DLSS in image quality, mostly on moving foliage, but it works on cards where DLSS does not exist.

XeSSBest on Intel Arc+20 to +30%

Performs best on Arc, where it uses dedicated units. It works on NVIDIA and AMD, but FSR is usually the better pick there.

The tables above are all without upscaling, so these gains add on top of them.

Upscaling is the only lever that gives you FPS without touching visual quality, and that is why it is the first one to try: before turning shadows down, switch DLSS or FSR to Quality mode. The rule is simple: the higher the resolution, the more it gives and the less you notice it. At 4K it can save your session; at 1080p it gains little and the image loses sharpness.

Tips for your card's brand in Dead or Alive 6 Last Round

NVIDIA
  • Resizable BAR on in the BIOS. On boards from 2020 onwards it ships disabled more often than it should.
  • Low latency mode to "Ultra" in the NVIDIA panel: it gives no FPS, but it removes the feeling of lag.
  • Don't force antialiasing from the control panel. The in-game one is cheaper, and forcing it costs 10-15% without you noticing.
AMD
  • Smart Access Memory on if your board and processor support it. It is free and worth several FPS.
  • Radeon Anti-Lag yes; Radeon Boost no, if the game has slow motion or wide vistas: it lowers resolution in motion and it shows.
  • Radeon Chill off while you measure: it caps your FPS and looks like a problem with the game.
Intel Arc
  • The driver is the number one factor. Arc has gained performance through drivers like no other card: one six months old can cost you 20%.
  • Resizable BAR is mandatory, not optional: without it an Arc performs far below what it should.
All cards
  • Close the overlays (Steam, Discord, GeForce Experience): they are the most common cause of micro-stutter.
  • On a laptop, plugged in and in performance mode. On battery you can lose half your FPS.
  • Borderless window if fullscreen stutters on Windows 11.

Almost everything above is free and done once: Resizable BAR and Smart Access Memory ship disabled on many boards and are free FPS. If you own an Arc, updating the driver is literally the best investment you can make without spending a cent.

Stuttering in Dead or Alive 6 Last Round: how to fix it

1 · Shader compilation

Stutter in the first few minutes after updating the game or the drivers is normal. It sorts itself out.

2 · Turn off overlays

Steam, Discord and GeForce Experience overlays cause micro-stutter.

3 · The SSD is not optional

The studio lists it as required. On a mechanical drive, stutter while areas load is not fixed by any setting.

Dead or Alive 6 Last Round requirements FAQ

What are the minimum requirements for Dead or Alive 6 Last Round?

With a GeForce GTX 1060 (VRAM 6GB) or higher, Radeon RX 590 (VRAM 8GB) or higher and 8 GB of RAM you are in. Minimum specs are exactly that: the setup where the game starts and is playable, usually at 1080p with quality turned down — not the one that gives you a comfortable experience. The full table is above.

And the recommended requirements for Dead or Alive 6 Last Round? How do they differ?

The recommended specs ask for a GeForce GTX 1070 (VRAM 8GB) or higher, Radeon RX 5700 XT (VRAM 8GB) or higher. The minimum guarantees the game works; the recommended one, that it looks and moves the way the studio designed it, around 60 FPS at 1080p on high quality. If you land between the two, the game runs: you will have to turn a setting down.

What card do I need to play Dead or Alive 6 Last Round at 60 FPS?

Drop one quality step and any of those figures eases off.

What if my card is not in the table?

The calculator places it between the two nearest measured cards and gives you the range it falls into on Dead or Alive 6 Last Round. You will not see an invented exact number: you will see between which values it sits and whether it is enough. If your card falls outside everything tested, we say so rather than making a figure up.

How many FPS are enough?

It depends on the game, and Dead or Alive 6 Last Round is no exception. 30 is the playable floor in a slow-paced game, and you can feel it is tight. 60 is the sensible target: the image responds and does not tire you out. Past 120 it only pays off with a monitor faster than 60 Hz. And steadiness matters more than the average: a constant 50 FPS plays better than swinging between 40 and 90.

How much RAM and video memory does Dead or Alive 6 Last Round need?

The game asks for 8 GB of RAM. Being short on RAM does not lower your average FPS so much as it causes stutter while areas load.

Do I need an SSD for Dead or Alive 6 Last Round?

Yes — the studio lists it as required, not as a recommendation. On a mechanical drive, stutter while areas load is not fixed by lowering graphics settings: the bottleneck is the drive, and no preset touches it.

Do DLSS and FSR raise FPS in Dead or Alive 6 Last Round?

Between 20% and 35% more, depending on mode and resolution, without touching graphics quality: it is the first lever to try, before turning shadows down. The higher the resolution, the more it gives and the less you notice it; at 1080p it gains little and the image loses some sharpness.

Where is Dead or Alive 6 Last Round cheapest?

We compare 2 deals across 2 verified stores and take you to the cheapest of the day. See all Dead or Alive 6 Last Round deals →