GAB250MDS3H Intel B250 (Socket 1151) DDR4 Micro ATX motherboard supports Intel Core 7/6th generation microprocessors with dual-channel DDR4 memory capacity, 4 UltraFast M. 2 DIMMs with Gen3 x4 PCIe Gen3 and Intel Optane Memory Ready SATA interface Triple Display Interfaces with Gen3 x4 PCIe and SATA Interface
Support for Intel Core i7 processors of 7th and 6th generation Intel Core i7/ processors Intel Core i5/i5/i3/i3/i Intel Pentium processors/ Intel Celeron processors with LGA1151 chipset.
4 DDR4 DIMM jacks supporting up to 64GB of system memory.
Due to a limitation of the Windows 32bit operating system, when more than 4 GB of physical memory is installed, the actual size of the memory displayed will be smaller than the size of the physical memory installed.
Two-channel memory architecture:
Support for DDR4 2400 (O. C.)* / 2133 MHz memory modules
To support 2400 MHz or XMP memory, you must install a 7th generation processor.
Graphical outputs on board:
1 x DSub port, compatible with a maximum resolution of 1920x120060 Hz
1 x DVID port, compatible with a maximum resolution of 1920x120060 Hz
The DVID port does not support the DSub connection per adapter.
1 x HDMI port, compatible with a maximum resolution of 4096x216024 Hz
Support for HDMI version 1.4.
Support for up to 3 displays at the same time
Memory sharing capacity up to 1 GB
1 x PCI Express x16 slot, running on x16
2 x PCI Express x1 slots
(All PCI Express slots comply with PCI Express 3.0 standard.
1 x M. 2 connector (female connector 3, M key, type 2242/2260/2280/2280/22110 SATA and PCIe x4/x2 SSD support)
6 SATA 6 Gb/sec connectors
6 USB 3.1 Gen 1 ports (4 rear panel ports, 2 ports available through internal USB headers)
6 x USB 2.0/1.1 ports (2 rear panel ports, 4 ports available through internal USB headers)
Realtek ALC887 codec with 2/4/5/5.1/7.1-channel high-definition audio and S/PDIF Out support.
Realtek GbE (10/100/1000 Mbit) LAN chip and micro ATX Form Factor size; 22.6cm x 19.3cm